Product 7/8

Previous
Return to the Product List
Next

Pneumatic pressure switch

1.Simple installation, plug-in port or thread-in fitting. 2.Compact size: 26×10×10.4 mm. 3.Setting pressure range:Vacuum (0~－101.3 kPa), Positive (0~0.6 MPa) 4.Low cost.
Features
 • Simple installation, plug-in port or thread-in fitting.
 • Compact size: 26×10×10.4 mm.
 • Setting pressure range:Vacuum (0~ －101.3 kPa), Positive (0~0.6 MPa)
Specifications :
Dimensions
26×10×10.4 mm
Operating / Setting pressure range
Vacuum : 0 ~ －101.3 kPa, Positive : 0 ~ 0.6 MPa
Medium
Air, Non-corrosive / Non-flammable gas
Proof pressure
Vacuum : 0.6 MPa, Positive : 1.5 MPa
Response time
Approx. 1ms
Current consumption
10mA max.
Sensor type
NPN or PNP
Output short circuit protection
Yes
Setting method
Adjusting by VR
Indicator
Red LED turns ON
Enclosure
IP 40
Ambient temp. range
Operation: 0 ~ 60℃, storage:－20 ~70℃ ( No condensation or freezing)
Ambient humidity range
Operation / Storage: 35~85% RH (No condensation)
Vibration
Total amplitude 1.5mm, 10Hz-55Hz-10Hz scan for 1 minute, two hours each direction of X, Y and Y
Shock
980m/s2 (100G),3 times each in direction of X,Y and Z
Piping method
Push-in tube or thread-in
Lead wire
Oil-resistance cable, 3 wires(0.18mm2), φ2.6mm
Weight
Approx. 50 g (with 3-meter lead wire)

  • Model: MP10
  • 0 Units in Stock


This product was added to our catalog on Monday 25 June, 2012.
Copyright © 2025 Numac Engineering Pvt. Ltd.. Powered by Mind Source